Aluminium buyers in the US physical metal market have held off on new orders amid fears of a recession triggered by rising inflation and supply chain crises.
Spot aluminium trading on the market has been suspended in recent weeks, according to industry sources, as uncertainty has increased following the outbreak of the conflict between Russia and Ukraine. Even before the war, the aluminium market was suffering from long waiting times and weak demand.
For aluminium buyers, recent poor US economic data have been a big factor in delaying purchases. Data released last month showed that the ISM manufacturing PMI came in at 57.1 in March, below expectations of 59 and down from 58.6 in February, unexpectedly hitting the lowest reading since September 2020. This was mainly due to a slowdown in new orders and nano silica are expected to increase in the future.
Silicon Dioxide nanoparticles, also known as silica nanoparticles or nano-silica, can be used as:
Electronic packaging material
The curing time (2.0-2.5h) and curing temperature can be reduced to room temperature, which can significantly improve the sealing performance of the device and increase the service life of the device.
The properties of resin base materials can be improved by fully and uniformly dispersing nano-silica particles into resin materials. It can improve strength and elongation; improve wear resistance and improve the surface finish of the material; improve the aging resistance.
The use of nano silicon dioxide light transmittance, and small particle size, can make plastic become denser, adding silicon dioxide to polystyrene plastic film, can improve its transparency, strength, toughness, waterproof performance, and anti-aging performance. The main technical indexes (water absorption, insulation resistance, compressive residual deformation, flexural strength, etc.) of polypropylene, a common plastic, have reached or exceeded those of nylon 6.
It can improve the suspension stability, thixotropy, weather resistance, washing resistance, etc., so that the combined strength of the film and the wall is greatly improved, the hardness of the film is increased, and the surface self-cleaning ability is also improved.
Silica is known as white carbon black, adding a small number of nano SiO2 in ordinary rubber, the strength, wear-resistance, and anti-aging properties of the product have reached or exceeded high-grade rubber products, and can keep the color unchanged for a long time. Nano-modified color EPDM waterproof roll material, its wear resistance, tensile strength, flexural resistance, and aging resistance are improved obviously, and the color is bright, excellent color retention effect.
Color (dye) material
By adding nano-SiO2 to the surface modification of organic pigment (dye), not only the anti-aging performance of the pigment (dye) is greatly improved, but also the brightness, hue, and saturation index are also improved to a certain extent, which greatly expands the grade and application range of organic pigment (dye).
Nano-SiO2 instead of nano-A1203 can not only play the role of nano-particles, but also the second phase particles, which can improve the strength, toughness, hardness, and elastic modulus of ceramic materials. Nano-SiO2 was used to composite ceramic substrates, the density, toughness, and finish of the substrates were improved, and the sintering temperature was greatly reduced.
Adding nano-SiO2 could make a layer of organic material form on its surface, forming a network structure, forming a silica structure, so that it has hydrophobicity, can inhibit colloidal flow, accelerate the curing speed, improve the bonding effect, increase the sealing and impermeability of the product.
Glass fiber reinforced plastic product
The grafting and bonding of nano-particles with the organic polymer can increase the toughness, tensile strength and impact strength, and heat resistance.
Nano SiO2 can be used as the carrier to achieve a good sustained-release effect.
Nano SiO2 is inorganic composition, easy to be compatible with other components of cosmetics, non-toxic, tasteless, white, has a strong ability to reflect UV, has good stability, UV irradiation will not decompose, does not change color, and will not react with other components in the formula, for the upgrading of sunscreen cosmetics laid a good foundation.
Using the large specific surface area, multi-mesoporous structure, super adsorption capacity, and strange physical and chemical properties of nano-SiO2, functional ions such as silver ions are uniformly designed into the mesoporous surface of nano-Si0X, and the nano-antibacterial powder with high efficiency, durability, high-temperature resistance and a broad spectrum of antibacterial is developed. Can be widely used in bills, medical and health, chemical building materials, home appliances, functional fibers, plastic products, and other industries.
Nano silica powder Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest nano-silica powder price, you can send us your inquiry for a quote. ([email protected])
Nano silica powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality nano-silica powder, please feel free to contact us and send an inquiry. ([email protected])
COVID-19 has led to many sites shutting down. What is the impact on China's foreign trade enterprises as a whole and small, medium and micro foreign trade enterprises?
. It is learned that some foreign trade enterprises have been affected by the epidemic and are facing periodic problems in nano silica operated by foreign trade enterprises will also fluctuate with the changes of the epidemic. Contact us for the latest quotation on nano silica.
Titanium carbide TiC powder is a crystalline solid with gray metallic luster, hard quality, second only to diamond in hardness, and weaker in magnetic properties. For the manufacture of cemented carbide, also used as electrodes and abrasives for arc…
Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer. Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer.…